Raw Materials
* Better view on DesktopMECHANICAL PROPERTIES
PHYSICAL PROPERTIES
COMPOSITION
Reset Filter
|
Material Group
|
Alloy | Equivalent Grades |
Technology
|
Elongation % | Tensile Strength MPa | Yield Strength (0.2%) MPa | Shear Strength MPa | Hardness Brinell |
|---|
|
Material Group
|
Alloy | Equivalent Grades |
Technology
|
Density g/cm3 | Melting Point (±50) °C | Thermal Conductivity W/mK | Coefficient of Thermal expension | Electrical Conductivity %IACS |
|---|
|
Material Group
|
Alloy | Equivalent Grades |
Technology
|
Al | Cu | Mg | Fe (max) | Tin (max) | Ni (max) | Cr | C | Mo | Mn | Si | Zn | Sn | Ca | Ni | Bi | Ti | S | Sb | P | Co (Cobalt) | Pb | Cadmium (max) | Other | ROHS complaint |
|---|
Compare
Reset
The data in this table is presented as a service to the reader as non-binding general information
Using data from the table is under the sole responsibility of the reader
