Stainless Steel 15-5 PH H900
Material Group | |
|---|---|
| Material Group | Stainless Steel |
| Alloy | 15-5 PH H900 |
| Equivalent Grades | UNS S15500 |
| Technology | CNC Machining & Turning / MIM Injections |
Mechanical Properties | |
|---|---|
| Elongation % | 6.8 |
| Tensile Strength MPa | 1490 |
| Yield Strength MPa | 1310 |
| Shear Strength MPa | 870 |
| Hardness Brinell | 430 |
Physical Properties | |
|---|---|
| Density g/cm3 | 7.8 |
| Melting Point (±50) °C | 1430 |
| Thermal Conductivity W/mK | 17 |
| Coefficient of Thermal expension | |
| Electrical Conductivity %IACS | 2.2 |
Composition | |
|---|---|
| Al | |
| Cu | 2.5-4.5 |
| Mg | |
| Fe (max) | 71.9-79.9 |
| Tin (max) | |
| Ni (max) | 3.5-5.5 |
| Cr | 14-15.5 |
| C | 0.07 |
| Mo | |
| Mn | 1 |
| Si | 1 |
| Zn | |
| Sn | |
| Ca | |
| Ni | |
| Bi | |
| Ti | |
| S | 0.03 |
| Sb | |
| P | 0.04 |
| Pb | |
| Cd | |
| Other | |